Requirements for the Coursework

INTRODUCTION 
 
Implementation of a course project provides the student a series of analytic action - fromproblem statement to its solution and protection project. Thus, the course design is the final stage in teaching the course.

1 Goals and Objectives Course design 
 
The aim of course design is a consolidation of knowledge acquired in the study course and other courses in the specialty, skills in information and analytical activities. 
In the course of work a student should learn: 
- Analyze the subject (problem) area; 
- Build a model using information software; 
 
Two themes of course work 
Upon request the consent of the student and supervisor. 
3 The order of performance Coursework 
 
The main stages of the course project: 
- Choosing the topic; 
- Analysis of the industry; 
- Problem statement; 
- Analysis and choice of method and tools; 
- Conducting research; 
- Development of models (models); 
- Analysis of the developed model and formulate proposals for its optimization; 
- Issuance of Explanatory Statement; 
- Protection project. 
The election theme. The student must receive the head of the course design theme or suggest your own theme. In the latter case subject agrees with the head of course design.At this point, is formed as the previous goal of development, subject to correction at the stage of the problem. 
Analysis of the subject area. During this stage to identify the objects and processes that are characteristic of the field, the interaction of different objects with each other and their participation in the process. Then, following the preliminary purpose of development, it is necessary to outline the range of facilities that are necessary for further consideration, ie those that are directly relevant to the purpose of development. 
Statement of the problem. Problem is essential, developed jointly with the supervisor and refined during the study. 
The analysis and choice of method and tools. At this stage, based on analysis of the subject area and the task searches using modern information sources and analysis methods and tools suitable for solving the problem. Running the choice of method and tool and justification of this choice. 
Conducting research. This stage is one of the most important task and determined course.It is recommended to carry out research using systemolohichnyh methods which at present is the most effective and objective. Development of models (models). On the basis of the studies using the selected method and tools. The model is created at this stage to the fullest extent consistent with the objective research and adequately reflect the object is modeled 
Analysis of the developed model and formulate proposals for its improvement. Due to the complexity of the research facility development process model, usually an iterative and requires at each iteration of analysis and (or) test the current version of the model, and revision (if necessary). After constructing a model to make its analysis in terms of optimization and formulate their proposals in this regard. 
Registration explanatory note. Registration explanatory note is the last phase of the course project and aims to improve the skills of analytical and documentation. Requirements for the explanatory note in the next section. 
 
4 Requirements for the Coursework 
 
As a result of designing a course each student individually is an explanatory note. 
The structure of the explanatory note of the course design and approximate volume of the sections: 
- Cover sheet - 1 sec.; 
- The task of course design - 1 sheet; 
- Summary - 1 sec.; 
- Content - 1-2 sec.; 
- Introduction - 1-2 sec.; 
- The essence - 10-30 sec.; 
- Conclusions - 1-2 sec.; 
- References - 1-3 sec.; 
- Applications. 
The title page contains information about the discipline for which the design was performed, the subject of individual tasks, compiler of the explanatory note. 
The task of course design filled form number in 6.01. Annex A provides a form. 
Summary contains: 
- Information on the volume of the explanatory note, the number of its parts, illustrations, tables, applications, number of sources list of references; 
- Abstract; 
- List of keywords. 
The text of the abstract should reflect the purpose of course design, method of solving the problem, the results obtained. 
The list of keywords must contain from 5 to 15 words or combinations of text notes that most characterize the content and provide the possibility of information retrieval. Key words appear in the nominative case and printed in capital letters in a row, separated by commas. 
The introduction briefly taught assess the current state of the problem, the relevance of this work and the reasons for its conduct, purpose and scope of work. 
The essence of the explanatory note are teaching, sharing the material into sections.Sections can be divided into paragraphs or subsections and paragraphs. Items, if necessary, divided into paragraphs. Each paragraph and subparagraph shall contain complete information. 
The conclusions of assessing the results of work (including negative) proposed using the results of field work, economical, scientific, social significance of work. 
Explanatory note is issued in accordance with the requirements established by the university, with a mandatory subject of existing standards. 
Explanatory note executed ink, typewritten or by machine on one side of a sheet of white A4 paper (210 x 297 mm) according to GOST 3008-95 "Documentation. Reports in the field of science and technology. The structure and rules of design" [6]. 
General requirements for explanatory note is a logical sequence of teaching material, brevity, clarity and concreteness of theoretical and practical results, conclusions and evidence the validity of the recommendations. 
In handwritten or typewritten note method of performing a half intervals, with the machine - a rate of not more than 40 lines per page, even if its filling and height of letters and numbers not less than 1.8 mm. When writing text to comply with the following setup: top, left and bottom - not less than 20 mm, right - 10 mm. 
The names, names of applications, organizations, companies and other names are given in the original language. 
Structural elements of the "Summary", "Content", "Introduction," "Conclusions", "List of references") are not numbered, and their names are titles of structural sections. Sections and subsections should have titles. Paragraphs and subparagraphs may have headlines.Titles structural elements of notes and section headings should be placed in the middle line and print in capital letters without periods end, not stressing. Titles subdivisions, paragraphs and subparagraphs notes should begin with abzatsevoho retreat and print small letters, except the first capital, not not stressing the point without end. Abzatsevyy retreat should be uniform throughout the text notes and five equal signs. If the title consists of two or more sentences, their share point. Wrap words in the header section is not implied. 
The distance between the header and the next or previous text should be: with handwritten and typewritten ways - at least three intervals, with the way the machine - at least two rows. 
Not allowed to place the name section, subsection, and paragraph and paragraph at the bottom of the page if it is only after one line of text. 
Paginate to Arabic numerals, observing continuous numbering throughout the text. The page number shall put in the upper right corner with no end point. 
Sections, subsections, paragraphs, subparagraphs explanatory note should be numbered in Arabic numerals. Sections of the explanatory note should have serial numbers within the substance of the explanatory notes and marked with Arabic numerals without a period, eg 1, 2, 3, etc. Departments should have serial numbers within each section. Numbers of units consisting of the numbers of sections and subsections, which are separated by a dot, eg 1.1, 1.2, 2.3, etc. 
The list of requirements, guidelines, regulations, contained in the text paragraph or subparagraph may be designated by Arabic numerals in parenthesis or may not be marked. Moreover, each list must begin with a paragraph and end with a semicolon. 
Illustrations should be placed in an explanatory note immediately following the text in which they are first mentioned, or on the next page. All illustrations should be referenced in the explanatory note. Illustrations can be called that is placed under the illustration. If required by the explanatory illustration of the base data. Illustration is indicated by the word "Figure", which together with the name of the picture is placed after the explanatory data, for example, "Figure 2.1 - Scheme of the algorithm." Illustrations should be numbered in Arabic numerals ordinal numbering within the section, except for figures given in the Appendices. Most artwork is made up of the section number and serial number of illustrations, separated. If artwork is not placed on the same page, it can be transferred to others, thus the name of the artwork placed on the first page, explanatory data - on every page, and under them indicating "Figure, a leaf." 
Tables should be placed in an explanatory note immediately following the text in which they are first mentioned, or on the next page. All tables must be referenced in the explanatory note. The table can be called that print lowercase letters (except the first capital) and placed above the table. If rows or columns outside the table format page table is divided into parts, placing one part on another, or near, or shifting of the table on the next page.The word "Table" show once left on the first part of the table over other parts of the writing: "Continuation of the table," indicating its number. Tables should be numbered in Arabic numerals ordinal numbering within the section, except for the tables listed in the annexes.Most table consists of the section number and serial number of the table separated. 
Formulas and equations are placed in the explanatory note immediately following the text in which they are first mentioned in the middle of the page. Above and below each formula should be left at least one blank line. Formulas and equations should be numbered in Arabic numerals ordinal numbering within the section, except for formulas and equations presented in the appendices. Number formula or equation consists of the section number and serial number of a formula or equation, separated. Most formulas or equations indicate the level of formulas or equations in parentheses in the rightmost position on the line. Explanation of symbols and numerical factors that make up the formula or equation, should lead directly to the order in which they are given in the formula or equation.Explanation of the meaning of each character or numeric ratio to give a new line. The first line begins with a paragraph explaining the word "where" without a colon. Wrap formula or equation for a line is assumed only for signs of operations performed, with a sign at the beginning of the operation line is repeated. Moving a formula or equation for the multiplication sign is used mark "x". The formulas that follow one after another, and not separated text, comma separated. 
Links to the text should cite the source as they mention in the note, indicating the serial number, highlighted by two brackets, eg [5]. 
The text of the explanatory note are assumed to make only commonly used abbreviation (eg "etc., etc., etc.." Clarification or abbreviations). If the memorandum adopted specific terminology, and used a little common abbreviations, new symbols, signs, etc., they must provide a list in a separate list. The list must be placed column in which words (in alphabetical order) are reduced, and right - their detailed transcription. If special characters, terms, abbreviations and symbols are given at least three times, the list is not, and their transcription cited in the text of the first reminder. 
List of references arranged as part of the explanatory notes on the new page in accordance with GOST 7. 1-84 "bibliographic description of the document. Sharing requirements and rules sostavlenyya." 
For registration of citations, the correct entry rate generally recommended guidelines [7], are based on relevant standards. 
Add to arrange as a continuation of the explanatory notes on these pages to, or in part, positioning applications in order of appearance of links in the text explanatory note. Each application must begin with a new page and have a title printed at the top of lowercase letters with the first capital symmetrically on the text page. The middle line of the heading lower case letters from the first uppercase should be typed the word "Annex" and capital letters to denote addition. Firefox should be identified consistently Ukrainian alphabet capital letters, except letters G, A C, I, J, J, O, M, L. One application is designated as A. Firefox should have a common with the rest of the explanatory note continuous numbering.The text of each application, if necessary, can be divided into subsections, and paragraphs that are numbered in Arabic numerals within each application. 
 
5 Protection Practices course work and its evaluation 
 
To protect coursework allowed the supervisor, who runs the course design. 
Student during protection shall report the main results of course work. Approximate performance time - 5 minutes. After that, the student must answer the questions asked. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание:

Введение................................3

I. Организация как функция управления...................4

1. Состав, структура  и особенности...................4

2. Организация функциональной  подготовки...............7

2.1 Приоритеты функционального  и структурного подхода.........7

2.2 Функциональное  содержание организации..............10

2.3 Формирование  функциональной структуры управления.......14

2.4. Принципы формирования  типового функционального звена  управления..........21

II. Принципы динамической организации.................29

Заключение.............................36

Список литературы.........................39